Cleaning your garage door properly
When was the last time you washed your garage? If you’re shocked by this question, you may need to examine your garage door immediately. It’s likely to be very filthy. The elements – for instance, the wind or rain and the rain taking care of it isn’t enough any longer.
You’ve noticed how filthy the garage door is what is the best way to fix it? It’s time to get your garage door cleaned and you’re able to tackle it yourself. What you need now is some helpful tips and a couple of tricks to go about it in the correct method.
Here’s how you can take care of your garage door:
How to clean a Steel Garage Door
Here are the steps you should be following if the garage door is constructed of steel that has been pre-finished.
Step 1: Prepare 1 cup of mild laundry detergent. The solution should be lower than 0.5 percent of phosphate and five gallons of water. Make use of the solution to get rid of the grime and dirt by wiping your garage doors.
Step 2: To clean oil staining, apply bleach in diluted form and water. Be sure the garage door has been thoroughly cleaned so it is clear that detergent, as well as bleach, don’t mix. After the stain has gone, you can wash the door a second time.
Step 3: Make sure to include the sides, top, and the area behind the weather stripping of the door to your garage.
Step 4: If you notice the dirt that has accumulated on the door, you are able to quickly remove it using your hands, or purchase a basic tool to aid in the removal.
Step 5: Find a non-abrasive cloth or sponge and use it for cleaning the door of your garage.
Step 6: Dry the garage door with an unwashed piece of cloth once you’ve cleaned it.
How do you clean a wood Garage Door?
Here are the steps you must take to clean your wooden garage door correctly.
Step 1: Make use of an answer made of water and mild detergent. Find a clean sponge and then soak it in the solution prior to wiping off any debris and dirt that may be on the surface of your door.
Step 2: Wash the door completely with the aid of a garden hose. The garage door should completely dry.
Step 3: If find the finish of your garage door has already been eroded or is thinning then you can use this detergent to wash it up before drying. After drying you can use an oil or alkyd primer to prime the areas affected. Then follow it up by completing the priming process or applying a finishing coat.
Step 4: End the cleaning process with the application of a finish coat especially if there are no damaged patches are found on the wooden garage door.
Follow the steps listed above to clean your garage door correctly. It shouldn’t be difficult provided you do it in the correct way and use the appropriate tools to complete the task. Visit your nearest Garage Door Rockwall TX Today.